Hello, bobraphtoneafwata:
Thank you for contacting Intel Embedded Community.
Reviewing your previous communication, your problem is related to a third design and a suggested configuration provided by the developer of this project. Due to these facts, we suggest you address your questions as a reference at the following websites:
https://minnowboard.org/community
https://www.coreboot.org/consulting.html
We hope that this information may help you.
Best regards,
Hi,
I am using Lewisburg C621 for my design and there are two reference designs I have (Wolf pass 0.7 and NC_PO_EXT_1V2). In each document the PCIE/SATA are connected to a different port of PCH for an M2 connector to PCH connection.
I was wondering if there is any document giving information on how many SATA/PCIE each SKU can support and if there are certain SATA/PCIE ports in each SKU that are not supported.
My design is delayed due to this and I am not sure if the ports I am using are actually supported by C621. I am using ports SATA/PCIE(8) to SATA/PCIE(11), but the Wolf pass 0.7 is using SATA/PCIE (4) to SATA/PCIE (7).
Also they are connecting SATA0 of M2 to port 7 (they are basing using lane reversal). If I am connecting to ports SATA/PCIE(8) to SATA/PCIE(11), should I also use lane reversal or can I even use them for C621?
Thanks a lot,
Niloofar
Does Braswell has some Relateddocuments about SATA RX (Receive) ModPHY Register section ?
Like SKYLAKE Can Adjustment SATA RX CTLE (As shown below)
After I installed 2014SP1 and set threadcount=1. After this I could connect to my board.
Now I try configure EDK2 source for compile it fo my board..
Are the Anybody now how I can set E3815 profile in EDK (cash size and count cpu core)..
在Skylake平台上LPC和ESPI是复用接口，只能选用一种总线, 请参考EDS #544924.
---------------------------------------------------------------------------------------------------------------------------
更多智能系统的技术交流，请关注我们微博weibo.com/onlinesalesgroup、并浏览我们官方社区http://embedded.communities.intel.com/community/zh_cn，或者官方技术交流QQ群120966104。
------------------------------------------------------------------------------------------------------------------------------
扩展板没有，有开发板比如伽利略Gen1和Gen2，用的的芯片是Quark X1000.
---------------------------------------------------------------------------------------------------------------------------
更多智能系统的技术交流，请关注我们微博weibo.com/onlinesalesgroup、并浏览我们官方社区http://embedded.communities.intel.com/community/zh_cn，或者官方技术交流QQ群120966104。
------------------------------------------------------------------------------------------------------------------------------
使用root权限操作可以解决此问题.
---------------------------------------------------------------------------------------------------------------------------
更多智能系统的技术交流，请关注我们微博weibo.com/onlinesalesgroup、并浏览我们官方社区http://embedded.communities.intel.com/community/zh_cn，或者官方技术交流QQ群120966104。
------------------------------------------------------------------------------------------------------------------------------
Hello, fekri:
Thank you for contacting Intel Embedded Community.
The information that may help you is stated at the following website:
https://www-ssl.intel.com/content/www/us/en/secure/embedded/nda/products/purley/documentation.html
In case that you have any inconvenience with this site, we suggest you report it or address your questions by filling out the Contact Us form.
We hope that this information is useful to you.
Best regards,
Hi,
I looking for the software utility eeupdate and the EEPROM image for the Ethernet controller I350.
where can i find them ?
Please contact me with my email: julien.cavallo@atos.net
Best regards
Hello, waynechang:
Thank you for contacting Intel Embedded Community.
In order to be on the same page, could you please tell us if this request is related to a technical problem? In case that your answer is affirmative, please give us a detailed explanation of the issue.
Waiting for your answer.
Best regards,
Hello, julien:
Thank you for contacting Intel Embedded Community.
The information that may help you can be found in the Intel Ethernet Controller I350 [Powerville] EEPROM Images document # 474233.
This document is classified as Intel confidential, which requires a CDNA between your company and Intel as well as a Privileged Resource & Design Center (RDC) account. It can be requested by filling out the form stated at the following website:
https://www-ssl.intel.com/content/www/us/en/forms/design/registration-privileged.html
We hope that this information may help you.
Best regards,
Edison不支持安卓.
---------------------------------------------------------------------------------------------------------------------------
更多智能系统的技术交流，请关注我们微博weibo.com/onlinesalesgroup、并浏览我们官方社区http://embedded.communities.intel.com/community/zh_cn，或者官方技术交流QQ群120966104。
------------------------------------------------------------------------------------------------------------------------------
都没有蜂鸣器.
---------------------------------------------------------------------------------------------------------------------------
更多智能系统的技术交流，请关注我们微博weibo.com/onlinesalesgroup、并浏览我们官方社区http://embedded.communities.intel.com/community/zh_cn，或者官方技术交流QQ群120966104。
------------------------------------------------------------------------------------------------------------------------------
屏幕不是跟着板子定义的，而是按接口定义的。一些通用接口的小尺寸屏幕如USB口，两者都能实现.
---------------------------------------------------------------------------------------------------------------------------
更多智能系统的技术交流，请关注我们微博weibo.com/onlinesalesgroup、并浏览我们官方社区http://embedded.communities.intel.com/community/zh_cn，或者官方技术交流QQ群120966104。
------------------------------------------------------------------------------------------------------------------------------
支持,已经存在于最新的image中.
---------------------------------------------------------------------------------------------------------------------------
更多智能系统的技术交流，请关注我们微博weibo.com/onlinesalesgroup、并浏览我们官方社区http://embedded.communities.intel.com/community/zh_cn，或者官方技术交流QQ群120966104。
------------------------------------------------------------------------------------------------------------------------------
Edison.
---------------------------------------------------------------------------------------------------------------------------
更多智能系统的技术交流，请关注我们微博weibo.com/onlinesalesgroup、并浏览我们官方社区http://embedded.communities.intel.com/community/zh_cn，或者官方技术交流QQ群120966104。
------------------------------------------------------------------------------------------------------------------------------
目前还不能支持, 也没有计划.
---------------------------------------------------------------------------------------------------------------------------
更多智能系统的技术交流，请关注我们微博weibo.com/onlinesalesgroup、并浏览我们官方社区http://embedded.communities.intel.com/community/zh_cn，或者官方技术交流QQ群120966104。
------------------------------------------------------------------------------------------------------------------------------
Well,I can hardly know what you mean.
Hello Carlos A
Thanks For your replay
In the Case,sometimes we Found A kind of brand SSD will not be Identification on Braswell motherboard
We had Try to Used this SSD on SKYLake motherboard,and test IEMT Tool
The results show that this SSD Can't Pass the Test When The RX (Receive) Over 4.0dB.
So We want to Check the RX (Receive) on our Braswell motherboard setting
1.How Can i find the RX (Receive) ModPHY Register section on Braswell ?
2.Can the RX (Receive) be modify on Braswell?
Best regards
Hello ,am developing a custom bios using Intel FSP and coreboot project .I have a baytrail processor and been following the Minnow max board example online ..my .rom wont boot please help